饰面用花岗岩矿图解荒料率计算方法探析

    A study on the calculation method of graphic waste material rate of granite ore for facing in Xinglongzhuang, Tai

    • 摘要: 荒料率是饰面用花岗岩矿勘查和储量核实中的重要经济技术评价指标,体图解荒料率是报告中理论荒料率计算的基础。但目前尚无一种完善的技术方法,本文以山东省泰安市某饰面用花岗岩矿为例,对体图解荒料率的3种计算方法做了简要探讨,计算得出该矿区饰面用花岗岩的体图解荒料率分别为35.53%,36.18%,34.47%,同实际荒料率与该矿开采生产统计的实际荒料率35% 较为接近,但与理论荒料率差距较大,因此,建议在进行饰面用花岗岩矿储量核实或勘查中,应及时测量和校正体图解荒料率。

       

      Abstract: the rate of waste material is an important economic and technical evaluation index in the exploration report or storage verification report of granite ore body for facing, and the rate of waste material in the volume diagram is the basis for calculating the theoretical rate of waste material in the report. But at present, there is no perfect technical method. Taking Xinglongzhuang granite mine in Tai"an City of Shandong Province as an example, this paper briefly discusses three calculation methods of the volume diagram waste rate, and concludes that the volume diagram waste rate of the granite mine is 35.53%, 36.18%, 34.47%, respectively, and the actual waste rate is close to the actual waste rate of 35%. However, there is a large gap between the theoretical waste material rate and it is suggested that in the annual reserve verification report and further exploration report, the volume diagram waste material rate in this area should be measured and corrected in time.

       

    /

    返回文章
    返回