某铜硫矿细粒级硫浮选回收扩大试验研究

    Study on scale-up continuous experiment for fine sulfur flotation in a Cu-S mine

    • 摘要: 针对某铜硫矿山的铜尾矿的大量23 μm以下细粒级硫损失的情况,应用BGRIMM细粒浮选成套技术装备开展了规模为1.0~1.5 t/h的细粒级硫浮选回收的扩大试验研究。试验结果表明:在入选硫品位为8.25%时,通过两粗一扫两精的浮选工艺流程,产出的硫精矿含硫45.40%,硫作业回收率达到了85.30%,精矿以细粒硫矿物为主,实现了对细粒级硫的有效回收。

       

      Abstract: In view of the large amount of fine particle sulfur loss below 23 μm in copper tailings of a Cu-S mine, the scale-up continuous experimental research on the flotation recovering of fine particle sulfur with the scale of 1.0-1.5 t/h is carried out by applying the fine flotation equipment of BGRIMM.The test results show that while the content of sulfur in raw ore is 8.25%, the sulfur concentrate produced by the flotation process of two roughing, one scavenging and two cleaning can contain 45.40% of sulfur, and the sulfur recovery reaches 85.30%.The concentrate is dominated by fine sulfur minerals, realizing the effective recovery of fine sulfur.

       

    /

    返回文章
    返回