某原生金矿浮选回收试验研究及设计实践

    Mineral processing test and design scenario for a primary gold ore

    • 摘要: 某微细粒嵌布高砷硫原生金矿,原矿Au品位4.38 g/t、Ag品位为22.2 g/t、S品位为2.88%、C品位为3.78%,工艺矿物学分析发现金以裸露金和硫化物包裹金为主。针对该矿石开展尼尔森重选及浮选回收试验,研究结果表明通过尼尔森重选工艺无法有效富集矿石中的金,精矿中金回收率仅为5%~10%。分别开展了脱碳预浮、无脱碳预浮、快速浮选及强化快速浮选四种浮选试验研究,结果表明浮选法能够有效回收矿石中的金,强化快速浮选作业效果最佳,金回收率达86.89%,精矿品位12.95 g/t。在工业设计实践中采用Jameson浮选机与传统机械搅拌式浮选机相结合的方案,有效降低能耗并减少占地面积。

       

      Abstract: A primary gold ore with finely disseminated high-arsenic and sulfur content, grading 4.38 g/t Au, 22.2 g/t Ag, 2.88% S, and 3.78% C, is subjected to process mineralogy analysis, revealing that gold primarily exists as exposed gold and sulfide-encapsulated gold. Knelson gravity concentration and flotation recovery tests are conducted on the ore. The results demonstrate that Knelson gravity concentration failed to effectively enrich gold, yielding a gold recovery rate of merely 5%-10% in the concentrate. Four flotation strategies: pre-decarbonization flotation, non-decarbonization flotation, rapid flotation, and enhanced rapid flotation are comparatively investigated. Flotation proves effective for gold recovery, with enhanced rapid flotation achieving optimal performance: a gold recovery rate of 86.89% and a concentrate grade of 12.95 g/t. In industrial design practice, a hybrid configuration combining Jameson flotation cells with conventional mechanically agitated flotation cells is implemented, achieving energy efficiency and floor space reduction.

       

    /

    返回文章
    返回