矿山电网智能化监测与故障定位系统研究

    Research on intelligent monitoring and fault location system for mine power grids

    • 摘要: 传统矿山电网监测系统存在故障信息感知片面、定位精度不够、实时响应迟缓等问题,提出一种融合多源异构信息和改良深度学习技术的矿山电网智能化监测与故障定位系统。首先分析矿山电网拓扑结构及其在恶劣工况下的运行特性,从而确定系统的监测需求,构建起“智能传感-边缘计算-云平台”三层协同的监测体系架构,达成对电气参量和非电气参量全方位感知,快速处理并执行智能决策,然后提出改良型1D-CNN-GAM-GRU混合特征获取模型,利用全局注意力机制(GAM)加强通道维度的关键特征,以及空间维度局部故障模式,依靠门控循环单元(GRU)精确把握故障暂态信号的时序相关关系。提出一种基于粗糙集理论筛选,并采用D-S证据理论的多源信息融合定位算法,该算法融合电气量、行波信号、设备状态,以及环境参数等大量信息,去除多余的干扰证据。经由MATLAB/Simulink创建6 kV矿山电网仿真模型,并向其中加入各类典型故障予以验证。实验结果表明,此系统平均定位误差缩减到0.35%之下,即便处于高阻接地、分支线路故障或者强噪声环境当中,其定位准确率依旧维持在99.4%,其稳定性和适应能力远胜传统行波法、阻抗法,以及单纯深度学习方法,为矿山电网的安全稳定运行给予了有力的技术保障。

       

      Abstract: Traditional power grid monitoring systems in mines face problems such as one-sided fault information perception, insufficient positioning accuracy, and slow real-time response. Therefore, an intelligent monitoring and fault location system for mine power grids that integrates multi-source heterogeneous information and improved deep learning technology is proposed. First, the topology of the mine power grid and its operational characteristics under harsh conditions must be analyzed to determine the system’s detection requirements and create a three-layer collaborative monitoring architecture of “intelligent sensing - edge computing - cloud platform”. This enables comprehensive perception of electrical and non-electrical parameters, rapid processing, and intelligent decision-making. Next, an improved 1D-CNN-GAM-GRU hybrid feature extraction model is planned, using a Global Attention Mechanism (GAM) to enhance critical features in the channel dimension and local fault patterns in the spatial dimension, while a Gated Recurrent Unit (GRU) precisely captures the temporal correlations of transient fault signals. A multi-source information fusion positioning algorithm based on rough set theory for selection and D-S evidence theory for fusion is proposed. This algorithm combines large amounts of information, including electrical quantities, traveling wave signals, equipment states, and environmental parameters, while eliminating redundant interference evidence. A 6 kV mine power grid simulation model is created in MATLAB/Simulink, and various typical faults are introduced for validation. Experimental results show that the system reduces the average positioning error to below 0.35%. Even under high-resistance grounding, branch line faults, or strong noise environments, the positioning accuracy remains at 99.4%. Its stability and adaptability are far superior to traditional traveling wave methods, impedance methods, and pure deep learning methods, providing strong technical support for the safe and stable operation of mine power grids.

       

    /

    返回文章
    返回