MA Yibo, GAO Gangrong, CHENG Shouye, YU Jianshui. Study on force in raise boring tool under reaming process and engineering application[J]. CHINA MINING MAGAZINE, 2019, 28(2): 158-161,168. DOI: 10.12075/j.issn.1004-4051.2019.02.027
    Citation: MA Yibo, GAO Gangrong, CHENG Shouye, YU Jianshui. Study on force in raise boring tool under reaming process and engineering application[J]. CHINA MINING MAGAZINE, 2019, 28(2): 158-161,168. DOI: 10.12075/j.issn.1004-4051.2019.02.027

    Study on force in raise boring tool under reaming process and engineering application

    • Simplified the force state of drilling tool in raise boring machine under reaming process which is based on extremely hard rock in iron mine.Study on force in drilling tool under reaming process must take into account many factors sand obtained the pulling force and torque force formula of drilling tool.The factors not only include vibration load of ream bit and occasional load, but also interaction between drilling tool and rock stratum.It is proved to achieve good results that the application of the pulling force and torque force formula which based on the analysis of rock compressive strength.The engineering practice application shows that research results are worth learning and promoting when study on pulling and torque force in drilling tool under reaming process.
    • loading

    Catalog

      Turn off MathJax
      Article Contents

      /

      DownLoad:  Full-Size Img  PowerPoint
      Return
      Return